The following setup is required to link Glofox to a Turnstile.
- Windows PC to run the Gantner Software with Glofox (The only access control software that we integrate with is Gantner). This has to be left on at all times. This should be a standalone device and we do not recommend that they use this computer for daily usage with Glofox. It should be a separate Windows PC.
- Gantner Writer 6000F - customers will use this device to assign cards/ key tags to members. There is a new version of this product but our system only works with the 6000F from Mario. The tech specs are here.
- GAT Access 6100F - members will scan cards / key tags against this device in order to validate their membership. This device sends the signal to the Turnstile to open. The tech specs are here.
- Turnstile - there is no list with turnstiles that are supported by Gantner. In general, if the turnstile has a feedback and relay with the right voltages the system will run. Refer to the GAT Access manual/data sheet mentioned above. If your current Turnstile has the right voltages, then it will function.